- Introduction
Introduction
1GE XPON ONU
Product Specification
BT-G113 model ONU is a user terminal device independently developed by BTPT in line with such industrial back- ground. The device has built-in two-layer switching function. It is compact and compact, and is an FTTH optical network unit with high performance and low power consumption. BT-G113 ONU can automatically switch EPON/GPON working mode and can be used in EPON/GPON network, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.
Size |
78*76*23mm |
Optical signal access |
EPON/GPON |
User interface |
1GE |
Indicator light |
POWER/PON/LOS/LAN |
Button |
Power switch Button, Reset Button |
Weight |
95g |
Power adapter input |
100V~240V AC,50Hz~60Hz |
PowerSupply requirement |
12V DC, 0.5A |
Power consumption |
<6w |
Working temperature |
-10°C ~ +45°C |
Environment humidity |
5% ~ 95% (Non-condensing) |
PON Interface | |
Module type |
SC/UPC or SC/APC |
Working wavelength |
up 1310nm,down 1490nm |
TX Optical power value |
0.5~4dBm |
RX Optical power sensitivity |
≤-28dBm |
Transmission distance |
0~20km |
Transmission rate |
GPON:Up 1.244Gbps;down 2.488Gbps EPON:Up 1.244Gbps;down 1.244Gbps |
Ethernet Interface | |
Interface type |
RJ45 |
Interface parameters |
1 x 10/100/1000Mbps auto adaptive Ethernet interfaces |
Features |
|
Highlights
- Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on) Spport EPON/GPON mode and switch mode automatically
- Support Route PPPoE/DHCP/Static IP and Bridge mode
- Support ONU auto-discovery/Link detection/remote upgrade of software
- Support IPv4/IPv6 dual mode
- Support Firewall function and IGMP multicast feature
- Support LAN IP and DHCP Server configuration
- Support Port Forwarding and Loop-Detect
Networking application
Typical access scheme: FTTH
Typical services: broadband Internet access, WIFI