- Introduction
Introduction
Product Overview
BT-226XR model ONU is a user terminal device independently developed by BTPT in line with such industrial back- ground.The device has built-in two-layer switching function and three-layer routing function. With compact structure and small appearance, it is a kind of FTTH optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.BT-226XR is an XPON product that can be adapted to EPON and GPON networks without replace- ing equipment and firmware.
Product Specifications
Hardware Specifications | |
Size | 155*113*28mm |
Optical signal access | 1*GPON/EPON |
User interface | 1GE+VOIP+2.4G WLAN |
Indicator light | POWER/PON/LOS/LAN1/WIFI/WPS |
Button | Power switch Button, Reset Button, WLAN Button, WPS Button |
Weight | 192g |
Power adapter input | 100V~240VAC,50Hz~60Hz |
PowerSupply requirement | 12V DC,1.5A |
Power consumption | <10w |
Working temperature | -10°C ~ +45°C |
Environment humidity | 5% ~ 95% (Non-condensing) |
PON Interface | |
Module type | Class B+ SC/UPC |
Working wavelength | up 1310nm,down 1490nm |
TX Optical power value | 0.5~4dbm |
RX Optical power sensitivity | -28dBm |
Transmission distance | 0~20km |
Transmission rate | GPON:Up 1.244Gbps;down 2.488Gbps EPON:Up 1.244Gbps;down 1.244Gbps |
Ethernet Interface | |
Interface type | RJ45 |
Interface parameters | 1 x 10/100/1000Mbps |
Wireless | |
Working mode | IEEE 802.11 b/g/n |
Antenna pattern | External 2T2R External antenna |
Antenna gain | 5dBi |
Wireless bandwidth | Support 20MHz/40MHz |
Interface rate | Maximum rate 300Mbps |
SSID | Up to 4 SSID broadcasts are supported |
Features |
Support EPON/GPON mode and switch mode automatically GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard GPON:8 T-CONTs,32 GEM Ports Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and maintenance Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mod Layer 2 Switching, support 802.1QVLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc Support PPPoE/ Static IP/ DHCP Support IPv4, IPv6 and IPv4/IPv6 Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering Support multicast IGMPv2 proxy/ snooping, support MLD proxy/ snooping Qos supports PQ, WRR, and CAR queue scheduling Provide 300Mbps 2.4GHz Wireless interface,2T2R external antenna, support multiple SSID Settings, Support DDSN,ALG, DMZ and UPNP |
Highlights |
Spport EPON/GPON mode and switch mode automatically Support Route PPPoE/DHCP/Static IP and Bridge mode Support ONU auto-discovery/Link detection/remote upgrade of software Support IPv4/IPv6 dual mode Support Firewall function and IGMP multicast feature Support LAN IP and DHCP Server configuration Support Port Forwarding and Loop-Detect | Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on)
Interface
Compatible with OLT Huawei/ZTE/Fiberhome
Networking application
Typical access scheme: FTTH
Typical services: broadband Internet access, WIFI