- Introduction
Introduction
BT-601EB
4FE+VOIP+2.4G WLAN+1USB
EPON ONU Product Specification
Product Overview
BT-601EB model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function. With compact structure and small appearance, it is a kind of FTTH EPON optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.
Product Specifications
Hardware Specifications | ||
Size | 165mm (L) *162mm (W) *28mm (H) | |
Optical Signal Acces | 1*EPON | |
User Interface | 4FE+VOIP+2.4G WLAN+1USB | |
Indicator Light | POWER/WPS/WLAN/USB/LAN1/LAN2/LAN3/LAN4/ TEL/INTERNET/LOS/PON | |
Button | Power switch Button, Reset Button | |
Weight | 300g | |
Power Adapter Input | 100V~240V AC,50Hz~60Hz | |
PowerSupply Requirement | 12V DC,1.5A | |
Power Consumption | <10w | |
Working Temperature | -10°C ~ +45°C | |
Environment Humidity | 5% ~ 95% (Non-condensing) | |
Wireless | ||
Working mode | IEEE 802.11 b/g/n | |
Antenna pattern | External 2T2R External antenna | |
Antenna gain | 5dBi | |
Wireless bandwidth | Support 20MHz/40MHz | |
Interface rate | Maximum rate 300Mbps | |
SSID | Up to 4 SSID broadcasts are supported |
PON Interface | |
Module Type | SFP PX20+ SC/PC |
Working Wavelength | up 1310nm,down 1490nm |
TX Optical Power Value | 0.5~4dbm |
RX Optical Power Sensitivity | Receiver sensitivity:-27dBm ; Overload optical power:-8dBm |
Transmission Distance | 0~20km |
Transmission Rate | Uplink 1.244Gbps;downlink 2.488Gbps |
Ethernet Interface | |
Interface Type | RJ45 |
Interface Parameters | 4*10/100Mbps auto adaptive Ethernet interfaces |
POTS interface | |
Interface type | 1* RJ11 |
Voice agreement | SIP |
Codecs | G.711/G.723/G.726/G.729 |
Integrated circuit protocol | Gr-909 protocol is applicable |
Features | |
Compliant with IEEE 802.3ah specification and OAM protocol Integrate OAM and TR-069 remote configuration and maintenance Compatible with Huawei,ZTE and Fiberhome OLT Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, etc Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping Qos supports PQ, WRR, and CAR queue scheduling Support DDSN, ALG, DMZ and UPNP | |
Highlights | |
Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on) Support PPPoE/ Static IP/ DHCP Support IPv4, IPv6 and IPv4/IPv6 Provide 300Mbps 2.4GHz Wireless interface,2T2R external antenna, support multiple SSID Settings Provide POTS interface, support SIP protocol,POTS integrated circuit test complies GR-909 Chipest :Broadcom |
Interface
Compatible with OLT Huawei/ZTE/Fiberhome
Networking application
Typical access scheme: FTTH
Typical services: broadband Internet access, WIFI