1GE ONU

Home /  Products  /  XPON ONU  /  1GE ONU

Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU
Low Power Consumption 1GE BT-122XR xPON ONU

Low Power Consumption 1GE BT-122XR xPON ONU

  • Introduction
Introduction

BT-122XR

1GE XPON ONU Product Specification

bt-122xr-1

Product Overview

BT-122XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background. The device has built-in two-layer switching function. It is compact and compact, and is an FTTH optical network unit with high performance and low power consumption. BT-122XR ONU can automatically switch EPON/GPON working mode and can be used in EPON/GPON network, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.


Product Specifications

Hardware Specifications

Size

90*90*24mm

Optical signal access

EPON/GPON

User interface

1GE

Indicator light

POWER/PON/LOS/LAN

Button

Power switch Button, Reset Button

Weight

95g

Power adapter input

100V240VAC,50Hz60Hz

PowerSupplyrequirement

12VDC, 0.5A

Power consumption

<6w

Working temperature

-10°C ~ +45°C

Environmenthumidity

5% ~ 95% (Non-condensing)

PON Interface

Module type

SC/UPC or SC/APC

Working wavelength

up 1310nmdown 1490nm

TX Optical powervalue

0.54dBm

RX Optical power sensitivity

≤-28dBm

Transmissiondistance

020km

Ethernet Interface

Interface type

RJ45

Interface parameters

1 x 10/100/1000Mbps autoadaptive Ethernet interfaces


Features

  • GPON working mode Compliance with IEEE 802.3ah & itu-t g.984.x standard

  • GPON:8 T-CONTs,32 GEM Ports

  • EPON working mode compliant with IEEE 802.3ah specification and OAM protocol    Supports the WEB configuration function

  • Layer 2 Switching, support 802.1QVLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc     Layer 3 Home Gateway/CPE features with Hardware NAT, supports  Route mode, etc

  • Supports the configuration of Ethernet interface rates, working modes,MDI/ MDIX auto-negotiation mode, and Pause flow control

  • Provides performance statistics on all Ethernet lines

  • Support multicast IGMP snooping

  • Supports the L2 wire speed forwarding

  • Supports the AES-128 algorithm for data encryption of downlink data

Highlights

  • Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on)

  • Spport EPON/GPON mode and switch mode automatically

  • Support Route PPPoE/DHCP/Static IP and Bridge mode

  • Support ONU auto-discovery/Link detection/remote upgrade of software

  • Support IPv4/IPv6 dual mode

  • Support Firewall function and IGMP multicast feature

  • Support LAN IP and DHCP Server configuration

  • Support Port Forwarding and Loop-Detect



Interface

Compatible with OLT Huawei/ZTE/Fiberhome

image


Networking application

Typical access scheme: FTTH

Typical services: broadband Internet access, WIFI


image


×

Submit your inquiry now and we will respond to you within 24 hours.

Get in touch

Related Search